close
close

How To Fix Shower Diverter Valve

How To Fix Shower Diverter Valve. Insert the diverter stem through the hole from the outside. The diverter in a shower diverts water away from the faucet and up towards the head.

BathTubShowerDiverterValveReplacementGuide011 from www.paulstravelpictures.com

If you happen to drop these parts accidentally, you can buy some replacement parts before you would seal up the. Spray the penetrating oil directly on the shower diverter knob at the top of the bathtub spout. Installing the new spout install the new spout onto the supply line and secure the setscrew.

If Your Diverter Has A Rotating Valve, Unscrew The Nut At The Stem Of The Diverter And Remove The Entire Valve.

Remove the cap from the faucet handle and loosen the screw. Then, remove the screw with the flathead or philip screwdriver to accurately pull out the middle knob. This can be done by turning off the shutoff valve that is located on or near it or unscrewing a hose from its inlet and outlet ends.

Relatively Easy Repair Depending On Your Skill Set.

Tighten it further with the socket wrench. A common type of shower diverter valve attaches to a rod on the tub spout and may also be called a liftgate. they are composed of three pieces: I had a leaky shower head so i thought i would show you how to replace the diverter valve in mine.

In Some Cases, You Can Fix The Damage To The Shower Diverter By Tightening The Screws Behind The Diverter Valve Plate.

Before installing the new shower diverter valve, clean the inside of the shower diverter valve opening using a rag dipped in vinegar. In any case, if the shower diverter is faulty, it will have to be disassembled both for inspection and for troubleshooting. Thread the shower valve socket over the diverter valve stem and secure it tightly over the bonnet nut.

First, Take The Diverter Gasket And Correctly Place It On The Diverter Gate.

To be sure you purchase the correct replacement, bring your old diverter with you to the store. Simply put, unscrew the diverter with the wrench and remove it from the faucet. Insert the straw of the oil can inside the tub spout and spray the inside as well.

Free Fast Repair For Shower Diverter Valve.

If you are going to handle this problem yourself, try to plug the drain up to avoid dropping small components into it. Now, you will need to take the adjustable wrench for this step and use it to detach the shower diverter from the faucet. Tighten the screws behind the faceplate of the diverter valve.

Leave a Reply

Your email address will not be published.