How To Reset Maintenance Light On Toyota Corolla 2017. Place your key in the ignition and turn to the on position, but do not start the vehicle. While holding it down insert the car key and turn the switch to “on” position.
The next step in learning how to reset a toyota corolla maintenance light is to locate the odometer button in your instrument cluster. Turn the ignition switch to the on position. Release the trip odometer reset button after 000000 appears on the trip odometer display and the maintenance light turns off.
Table of Contents
While Holding It Down Insert The Car Key And Turn The Switch To “On” Position.
Here are the steps on how to reset 2013 toyota corolla maintenance light : Press and hold the trip reset button near the odometer until “trip a” appears on the central screen. Turn the ignition to the “ acc ” or “ lock ” position.
Turn The Key Back To “Off.”.
Turn The Key Back To “Off.”
Press down and hold the odometer button. While you are holding the button, turn the ignition key just slightly so that the vehicle starts without kicking the engine off. Start the car and then press and hold the button that changes the odometer reading.
If This Does Not Work, You Can Try And Repeat The Steps Above.
Keep the reset button pressed as you look at the odometer, make sure that the trip meter reset button is still pressed. The next step in learning how to reset a toyota corolla maintenance light is to locate the odometer button in your instrument cluster. Keep holding the trip reset button until the miles section of the odometer flashes zero.
Image For Reference Only May Different From Your Model Step 3 Then Turn The Power Off.
I hope these steps have helped you reset the maintenance required notification on your toyota corolla. Release the trip odometer reset button after 000000 appears on the trip odometer display and the maintenance light turns off. Maintenance required reset is complete.